Page 9 of 11 FirstFirst ... 7891011 LastLast
Results 81 to 90 of 101

Thread: New bullet for the "Brick"

  1. #81
    What's a stroker? theman440's Avatar
    Join Date
    Jan 2013
    Location
    Las Vegas
    Posts
    1,251
    Got the left side hard line bent up -

    IMG_20190526_172233243.jpg
    If a man speaks while in his garage and his wife does not hear it, is he still wrong?

  2. #82
    What's a stroker? theman440's Avatar
    Join Date
    Jan 2013
    Location
    Las Vegas
    Posts
    1,251
    I got the axles back from Moser last week. Tonight I got around to installing the 5/8 studs.

    IMG_20190603_200431760.jpg
    If a man speaks while in his garage and his wife does not hear it, is he still wrong?

  3. #83
    I was the first... 67r/t4speeder's Avatar
    Join Date
    Jan 2013
    Location
    Caldwell, Idaho
    Posts
    5,975
    Those studs look stout, what wheel nut do you use Jeff?
    The Idaho Andy

  4. #84
    What's a stroker? theman440's Avatar
    Join Date
    Jan 2013
    Location
    Las Vegas
    Posts
    1,251
    They are flange nuts (you can see them in the photo) You also use the aluminum spacers shown in the pic. So it goes - wheel, spacer, nut.
    If a man speaks while in his garage and his wife does not hear it, is he still wrong?

  5. #85
    What's a stroker? theman440's Avatar
    Join Date
    Jan 2013
    Location
    Las Vegas
    Posts
    1,251
    Got my new radiator and started mocking it up. My biggest concern was if I was going to have to re-make the cooler lines.

    IMG_20190613_203152406.jpg

    I got lucky this time - all I had to do to make the drivers side line fit was to tweek the bends some.

    IMG_20190613_203211725.jpg

    For the passenger side I had to shorten it -

    IMG_20190613_203217711.jpg

    I cut and re-flared the line. These hydraulic flaring tools are awesome!

    IMG_20190613_210813236.jpg

    Done, next is recovery tank and electric fan.

    IMG_20190613_213745307.jpg
    If a man speaks while in his garage and his wife does not hear it, is he still wrong?

  6. #86
    Senior Member Mark's 69's Avatar
    Join Date
    Jan 2013
    Location
    St. Marys, PA
    Posts
    464
    Nice work!

  7. #87
    I was the first... 67r/t4speeder's Avatar
    Join Date
    Jan 2013
    Location
    Caldwell, Idaho
    Posts
    5,975
    Quote Originally Posted by Mark's 69 View Post
    Nice work!
    X2
    The Idaho Andy

  8. #88
    So many tailpipes..... so little time. ws27's Avatar
    Join Date
    Jan 2013
    Posts
    4,347
    Looks great Jeff.

    Is that a new style flaring tool?
    President, New England chapter of Coronetaholics anonomous.

  9. #89
    What's a stroker? theman440's Avatar
    Join Date
    Jan 2013
    Location
    Las Vegas
    Posts
    1,251
    Quote Originally Posted by ws27 View Post
    Looks great Jeff.

    Is that a new style flaring tool?
    Not sure how new it is Rich, it was my dads and I've had it 10 years now. It's made by Mastercool and it does GM fuel line, and metric bubble flares too.
    If a man speaks while in his garage and his wife does not hear it, is he still wrong?

  10. #90
    What's a stroker? theman440's Avatar
    Join Date
    Jan 2013
    Location
    Las Vegas
    Posts
    1,251
    The rear windows havent been rolled down in years and they were stuck. I like to brag that "everything" works on this car so I got to work fixin it. The cat whiskers are original so I am replacing them along with the roof rail weather strip. All the window needed was lubrication and adjustment, The inner whiskers for the quarter windows are stapled on - no way that's gonna happen so I riveted then on.





    The outer whisker was a bitch because the clip holes were in the wrong places and the lip was buggered up, but I got it on. Sorry no pics.
    If a man speaks while in his garage and his wife does not hear it, is he still wrong?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •