Results 1 to 3 of 3

Thread: Fuel filler neck install - '55 Dodge

  1. #1
    Junior Member
    Join Date
    Mar 2016
    Posts
    14

    Fuel filler neck install - '55 Dodge

    I saw a post for installing for a '69. had any experience with the '55 or '56? The bottom part of the neck is wedged between the frame and the body. Do you have to raise the body off the frame to remove? I can't figure out how to get it off. There isn't much room to negotiate the turns. That wouldn't be convenient to have to raise the body.

    Sutton

  2. #2
    I was the first... 67r/t4speeder's Avatar
    Join Date
    Jan 2013
    Location
    Caldwell, Idaho
    Posts
    6,079
    Can you lower tank a bit?
    The Idaho Andy

  3. #3
    Junior Member
    Join Date
    Mar 2016
    Posts
    14
    The tank is off the car. This is a full off restoration, but the body was put back on the frame after painting. However, it looks like the filler tube should have been put between the body and frame before attaching body. I don't remember having to raise the body before taking it off.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •