Hi everyone! I'm new here and new to the Dodge Coronet. I just picked up a 72 with a rebuilt 318 in really good condition except for a few electrical problems. The worst of which is that the indicators will not work. The emergency flashers work fine and I can hear the relay clicking. I pulled off the steering wheel to take a look at the indicator switch and it appears that the switch has been replaced as the plastic and connections look brand new. I took a peak under the steering column and the wires come out and connect to an 8 or 9 pin junction that then distributes them out further. That is where my investigation ended for now. A lot of the wires looked monkeyed with under the dash so it's almost impossible to follow the wiring diagram I have. Does anyone know how the wires that come out of the switch are supposed to be routed? Looking at this wiring harness makes me want to get a new remanufactured one and just spend a week rewiring to stock. I think there is a white, red yellow, yellow green, green, and green yellow coming off of the switch under the steering wheel. Any hints can help, thank you! God I hate electrical problems....