Posts: 6,759
Not sure how I quoted myself
Coffee where's my coffee
The Idaho AndyOL Blue is scared of Max
Posts: 3,208
67r/t4speeder Wrote: This look better?
ooooohhh.. factory markings..
Galen will be your best buddy now...
I love Mopars so much I'm date coding the skid marks in my underwear.
Posts: 2,449
I "love's" factory markings!!!
Objects quickly DISAPPEAR in the rearview mirror and PLEASE stay seated until the ride comes to a complete stop!!
Posts: 6,759
67440Dodge Wrote: ooooohhh.. factory markings..OL GG !! ?
The Idaho AndyOL Blue is scared of Max
Posts: 6,759
I removed the factory `67 only style idler arm and fabbed up a double shear bracket so a `68 on up Moog easy to find arm will fit now
Attached Files Thumbnail(s)
The Idaho AndyOL Blue is scared of Max
Posts: 4,336
Nice job Andy. Did you change the original hole as well?
President, New England chapter of Coronetaholics anonomous.
Posts: 6,759
ws27 Wrote: Nice job Andy. Did you change the original hole as well?I drilled out the taper to 9 1/6 size of bolt then put a thick washer on top and tacked it in place, then with a new longer bolt it fit great.
Center link is level again, before it was dragging on the header it was so loose.
I need ball joints also but would like to upgrade to later style joints and disc if I can find some original spindles somewhere.
ANYONE??
The Idaho AndyOL Blue is scared of Max
Posts: 6,759
I picked up a nice complete disc front from a later year Dart at the car show last Sunday, and I sold my old front end to a customer in need of hubs and drums for cheap so I started the tear down process to get him back on the road.
Attached Files Thumbnail(s)
The Idaho AndyOL Blue is scared of Max
Posts: 2,449
WOW! It doesn't rain there, you can do everything outside!! I have a 6" rain gauge and over the past couple of days, it's almost full!!
Objects quickly DISAPPEAR in the rearview mirror and PLEASE stay seated until the ride comes to a complete stop!!
Posts: 1,260
Nice work
Nobody wants a Charlie in the box
